TACTICAL BELT FORCE BELT BT12

1 Review(s)

New product

Tactical Belt UTactic FORCE BELT BT12 consists of two parts - an inner trouser belt and an outer waistband. Such functional structure allows to rigidly fasten the belt and prevent its free spinning, and also to secure attachable gear along the entire length of the belt.

The inner trouser belt is fastened by means of VELCRO, it is guided into the belt loops of trousers and has VELCRO (hooks) on the outside. The outer waistband has VELCRO (a loop) on the inside. The design when the outer waistband is placed over the inner belt (fixed to pants) allows to easily take off the belt together with the gear attached to it.

The dual-folded main strap and two MOLLEPALS straps on the outer waistband can reliably secure various gear.
Tactical belt UTactic FORCE BELT BT12 features the original COBRA buckle  manufactured by AustriAlpin with a metal evacuation ring. The evacuation ring integrated into the buckle allows using UTactic FORCE BELT BT12 not only as a trouser belt or a component of loadout belt systems, but also as a part of a rescue system for evacuation from height or battlefield.

More details

  • S
  • M
  • L

1 805 ₴

1 900 ₴

-5%

Design features:

  • the inner belt and the outer waistband are connected via VELCRO along the belt length;
  • two MOLLEPALS straps on the outer waistband;
  • original COBRA buckle from AustriAlpin with a metal evacuation ring;
  • adjustable belt length;
  • double-layered ultra-strong nylon strap;
  • belt width - 45 mm.

Grade 
10/19/2017

Благодарность из Израиля

Купил пояс несколько месяцев назад, очень удачная задумка. Удобно и под кобуру, и носил на нем некоторые подсумки FDP-Small FDP-Roll, и FANNY PACK. Ничего не скачет и не прыгает, не натирает. Пробовали так же поднимать за эвакуационное кольцо. Ремень справляется с задачей на все 100%. Громадная благодарность производителям.

    Write your review! !

    Write a review

    TACTICAL BELT FORCE BELT BT12

    TACTICAL BELT FORCE BELT BT12

    Tactical Belt UTactic FORCE BELT BT12 consists of two parts - an inner trouser belt and an outer waistband. Such functional structure allows to rigidly fasten the belt and prevent its free spinning, and also to secure attachable gear along the entire length of the belt.

    The inner trouser belt is fastened by means of VELCRO, it is guided into the belt loops of trousers and has VELCRO (hooks) on the outside. The outer waistband has VELCRO (a loop) on the inside. The design when the outer waistband is placed over the inner belt (fixed to pants) allows to easily take off the belt together with the gear attached to it.

    The dual-folded main strap and two MOLLEPALS straps on the outer waistband can reliably secure various gear.
    Tactical belt UTactic FORCE BELT BT12 features the original COBRA buckle  manufactured by AustriAlpin with a metal evacuation ring. The evacuation ring integrated into the buckle allows using UTactic FORCE BELT BT12 not only as a trouser belt or a component of loadout belt systems, but also as a part of a rescue system for evacuation from height or battlefield.